EQ Systems Controller Auto Level 55/5 2755 replacement
MUST CALL TO ORDER
Call 1-800-846-9659 to place your order.
EQ Systems controller 2755, replacement
Replacement control module for EQ Systems hydraulic leveling systems, version 2755.
Discontinued
This part has been discontinued. Contact EQ Systems Parts and Service for the replacement path for your system, on 800-846-9659 or through the parts and sales questions form.
What the controller does
The controller 2755 is the black box that sits between the control panel and the hydraulics. It reads the level sensor, decides which jack to move and for how long, and switches the valve coils and the pump motor to get there. The keypad or switch panel the operator touches is a separate part.
Set the Null after fitting a new controller
A replacement controller 2755 does not know where level is on your coach. After installation the Null has to be set, which teaches the system the level position the operator wants. The procedure is in the owner manual for your system and there is a video in the support section of the EQ Systems site. Auto-Level will not work correctly until this is done.
Voltage matters more than people expect
Before condemning a controller 2755, check voltage. Measured at the control panel it should not fall below 11 volts during operation, and at 10.5 volts the panel stops Auto-Level altogether. Auto-Level needs more voltage than manual control, so a coach that still runs the jacks manually but refuses to auto level is often a battery problem rather than a controller problem. The control panel has a low voltage light that comes on below about 10.5 volts and stays on until a button is pressed.
Before you replace a controller
The controller 2755, like all EQ Systems controllers, is maintenance free, so most failures are environmental or connection related. Check that the controller is properly secured and that the plug connections are free from corrosion before replacing it.
Replacement path
The unsealed 2745U may be used as a replacement for the 2730, 2745 and 2755. Where a coach originally used the prior sealed controller, patch harness EQ part 6632R makes the transition.
Related parts
The Auto Level keypad is part 3103. A keypad exposed to liquid will need replacing: keypads and controllers are maintenance free but they are not waterproof.
Verify compatibility before ordering
EQ Systems has built a number of controller versions and they are not interchangeable across every system. Check your original equipment before purchasing, either through the support section or by calling EQ Systems at 800-846-9659 with the number printed on the controller you are replacing.