Jayco Redhawk EQ Smart-Level System 2016 and Newer



Your 2016 and newer Jayco Redhawk Class C Motorhome includes the leveling jack and pump mount brackets already installed from the factory. This makes installing EQ Systems 8735NUPS Automatic Leveling-System an easy bolt on installation.

EQ Smart-Level allows you to level your coach with your smart phone by using built in Bluetooth capability. The automatic, one touch operation levels your coach in less than two minutes.  This is the same quality leveling system used by top manufacturers in the RV industry and is now available in installation friendly kits.  With its four two-way hydraulic cylinders, EQ Smart-Level has the ability to extend and retract the legs during the leveling sequence. This sequential leveling is a patented process that provides a more precise level throughout the length of the vehicle, adding stability while leveling as low to the ground as possible.

• Fits mid-2016 Jayco Redhawk and newer models only
• One pump operates all legs
• One touch, push button EQ Smart-Level operation
• Audible and visual prompts notify user when leveling is in progress and complete
• Stow legs quickly and easily with auto All Retract
• Manual override standard
Kit includes: 2- 13” stroke front jacks, 2- 13” stroke rear jacks, complete pump with manual override, EQ Smart-Level controls and all harnesses and hoses.

*Bluetooth capability – Compatible with IPhone, Android, and ASA Electronics iN·Command®Control System. To download the app open up the Android or Apple app store and type in EQ Smart Level. Download the app and make sure your Bluetooth setting is turned on or the app will not connect to your coach.

Fitment info: 2015 and newer Jayco Redhawks come from the factory with all of EQ’s leg brackets and pump mount brackets installed. Jayco does this for you to make your install quick and easy, since it is now a bolt on application. There are two minor, but significant differences in the systems we offer for the Jayco Redhawk Class C Motorhomes that involve the placement of the rear jack brackets. 2015 and half of the 2016 models will have the rear brackets mounted flush with the bottom of the frame rail. Later 2016, 2017, and newer units will have the rear brackets mounted approximately 3 inches lower than the frame rail.

You’ll need to inspect your unit to determine which of the following systems will work for your set up:
Flush Mounted Rear Brackets: EQ Smart-Level System 8735UPS
Lower Mounted Rear Brackets: Smart-Level System 8735NUPS

Please be certain that you are ordering the correct leveling system for your Jayco Redhawk!

*If you have a Chevy Chassis 4500 you may also need a pair of 3646 brackets for the front jacks. Please call if you have questions.

You may also like…