Single Switch White Plug #7814

Description

Switchgear box & harness for a single hydraulic jack that has a round, white 4 pin connector (where the switchgear plugs into the pump).

This switchgear will come with a pump connector harness to adapt to the round, white 4 pin connector on your pump

**if your motor solenoid has 2 plug in connectors (a 2 pin and a 4 pin) this will also need to be replaced. You will need to also purchase part #7055. This can be found in the Solenoid section.

If you have questions about what part number you need, please see the Switch Gear Replacement Chart located under the “Replacement Identification Charts” tab to the left.