SM 30 Hydraulic Leg (Must Call to Order)
MUST CALL TO ORDER
Call 1-800-846-9659 to place your order.
SM series hydraulic leg, 30" stroke, EQ Systems part 7893C
Tube in tube hydraulic jack leg from the EQ Systems commercial range. These are rugged, American made jacks that can be bought individually to add to an existing hydraulic system, or as part of a complete lifting and leveling system. The SM series is the 25k lbs per jack size.
Specifications
| Series | SM series tube in tube |
|---|---|
| Lifting capacity, each jack | 25k lbs |
| Tube dimension | 5" x 5" |
| Cylinder bore | 3.5" |
| Stroke length | 30" |
| Retracted length | 41.375" |
| Extended length | 70.75" |
| Weight | 135 lbs, approximate |
Weights are approximate because of the custom brackets and foot pads available.
Options for commercial use
- Pilot operated check valve, which hydraulically locks the leg in place
- Mechanical lock out bars, which physically lock the leg in the extended position
- Keyed switchgear, which prevents unauthorized use of the system
- Stand off brackets and custom foot pads
Running the leg
One EQ Systems pump assembly operates all the jack legs on a system and can be mounted in a powder coated steel box or tray, in 12 or 24 volt, with a variety of manual override options. Switchgear is made in house, performance verification tested, with a braided nylon exterior, in single, dual or quad, and custom lengths are available. Open spool manifolds with lift truck style levers are offered in dual or quad.
Service parts
The replacement hydraulic cylinder for this leg is part 1135. Cylinders are identified by the jack outer tube size and length rather than by the bracket, because jacks of the same size can carry different brackets and still take the same cylinder.
Wider range
Tube in tube legs run from the AJ at 8k lbs through AM 12k, CT 17k, SM 25k, HM 35k, OM 40k and OMX at 50k lbs per jack, in strokes from 16 to 30 inches with custom lengths available. If your application is outside this leg, call EQ Systems at 800-846-9659.