{"title":"Stabi-Lite","description":"\u003cp\u003eTired of your coach leaning when the slide room is extended or fed up with the constant swaying that results when you walk around in your coach, let STABI-LITE® stabilize your RV.\u003c\/p\u003e\n","products":[{"product_id":"stabi-lite-electric-class-c-ford-e-350-ford-e-450-and-chevrolet-c5500","title":"STABI-LITE® Electric Class C Ford E-350, Ford E-450 and Chevrolet C5500","description":"\u003ch3\u003eSTABI-LITE electric stabilizer system, Ford E-350, Ford E-450 and Chevrolet C5500 Class C chassis\u003c\/h3\u003e\u003cp\u003eSTABI-LITE stops a Class B or Class C motorhome leaning when the slide room goes out, and takes nearly all of the sway out of the coach when someone walks around inside it. It is a stabilizer, not a leveller: the legs are motor driven screw jacks rather than hydraulic cylinders, and they steady the coach rather than lift it.\u003c\/p\u003e\u003ch4\u003eSystem advantages\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEliminates coach lean when the slide is extended\u003c\/li\u003e\n\u003cli\u003eEliminates nearly all sway resulting from movement inside the coach\u003c\/li\u003e\n\u003cli\u003eClamp style mount, so no welding and no drilling to install\u003c\/li\u003e\n\u003cli\u003eConvenient one touch automatic operation\u003c\/li\u003e\n\u003cli\u003eLow profile design, so it needs less height than traditional systems\u003c\/li\u003e\n\u003cli\u003eComplete system weight under 80 lbs\u003c\/li\u003e\n\u003cli\u003eChassis specific design reduces installation time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat is in the system\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA set of two stabilizer jacks and risers\u003c\/li\u003e\n\u003cli\u003eClamping mounts for each stabilizer assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eComplete system wire harnesses\u003c\/li\u003e\n\u003cli\u003eSystem controller and switch pad\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHarnesses and mounting\u003c\/h4\u003e\u003cp\u003eThe kit includes two controller to motor harnesses at 7 and 12 feet, a 16 foot controller to switch panel harness and an 8 foot controller to battery harness, plus a 40 amp circuit breaker for the battery connection. The controller mounts close to the battery, in a sealed baggage compartment, a cabinet, or under the dash. \u003cstrong\u003eThe switch panel and controller are not weather resistant\u003c\/strong\u003e and must go in protected areas. The motor harnesses are color coded, gray and pink for leg 1 and purple and brown for leg 2, and the controller dials set lifting force per leg, which is how a coach with a slide out is brought to a more level state.\u003c\/p\u003e\u003ch4\u003eSafety interlocks\u003c\/h4\u003e\u003cp\u003eOne or more interlocks must be connected so that extend is denied with the ignition key on or the park brake released. Only one is required to disable extension.\u003c\/p\u003e\u003ch4\u003eKeeping it working\u003c\/h4\u003e\u003cp\u003eThe leg is a screw jack, so the screw and nut must be kept clean and dry. Wash with a wet rag or mild detergent, never a pressure washer, and do not spray cleaner heavily onto the motor gearbox. Lubricate the pivot points and the screw and nut with a \u003cstrong\u003edry film silicone or PTFE spray only\u003c\/strong\u003e. Oily or greasy lubricants attract dirt and cause screw and nut problems.\u003c\/p\u003e\u003ch4\u003eService parts\u003c\/h4\u003e\u003cp\u003eLeg assembly \u003ca href=\"\/products\/stabi-lite-leg-assembly\"\u003e7588\u003c\/a\u003e, about 16 1\/2 inches of travel. Class C channel mount brackets 7592PS passenger side and 7592DS driver side, fitting any channel frame up to a 3 3\/4 inch flange width. Motor and gearbox assembly \u003ca href=\"\/products\/harness-stabi-lite-motor-w-connector-added\"\u003e6836\u003c\/a\u003e; the motor is not sold separately from the gearbox.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQ011R1-STABI-LITE-Installation-Manual.pdf\" target=\"_blank\"\u003eSTABI-LITE Installation Manual, EQ011R1 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Stabi-Lite-Maint-Troubleshooting-TM.pdf\" target=\"_blank\"\u003eSTABI-LITE and Level-Lite Maintenance and Troubleshooting Guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958747791419,"sku":"8449AM","price":1155.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/8449_6554b7cb-d59f-4d87-901d-5143c14de2b4.jpg?v=1786536978"},{"product_id":"stabi-lite-electric-class-c","title":"STABI-LITE® Electric Sprinter Class C","description":"\u003ch3\u003eSTABI-LITE electric stabilizer system, Sprinter Class C chassis\u003c\/h3\u003e\u003cp\u003eSTABI-LITE stops a Class B or Class C motorhome leaning when the slide room goes out, and takes nearly all of the sway out of the coach when someone walks around inside it. It is a stabilizer, not a leveller: the legs are motor driven screw jacks rather than hydraulic cylinders, and they steady the coach rather than lift it.\u003c\/p\u003e\u003ch4\u003eSystem advantages\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEliminates coach lean when the slide is extended\u003c\/li\u003e\n\u003cli\u003eEliminates nearly all sway resulting from movement inside the coach\u003c\/li\u003e\n\u003cli\u003eClamp style mount, so no welding and no drilling to install\u003c\/li\u003e\n\u003cli\u003eConvenient one touch automatic operation\u003c\/li\u003e\n\u003cli\u003eLow profile design, so it needs less height than traditional systems\u003c\/li\u003e\n\u003cli\u003eComplete system weight under 80 lbs\u003c\/li\u003e\n\u003cli\u003eChassis specific design reduces installation time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat is in the system\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA set of two stabilizer jacks and risers\u003c\/li\u003e\n\u003cli\u003eClamping mounts for each stabilizer assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eComplete system wire harnesses\u003c\/li\u003e\n\u003cli\u003eSystem controller and switch pad\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHarnesses and mounting\u003c\/h4\u003e\u003cp\u003eThe kit includes two controller to motor harnesses at 7 and 12 feet, a 16 foot controller to switch panel harness and an 8 foot controller to battery harness, plus a 40 amp circuit breaker for the battery connection. The controller mounts close to the battery, in a sealed baggage compartment, a cabinet, or under the dash. \u003cstrong\u003eThe switch panel and controller are not weather resistant\u003c\/strong\u003e and must go in protected areas. The motor harnesses are color coded, gray and pink for leg 1 and purple and brown for leg 2, and the controller dials set lifting force per leg, which is how a coach with a slide out is brought to a more level state.\u003c\/p\u003e\u003ch4\u003eSafety interlocks\u003c\/h4\u003e\u003cp\u003eOne or more interlocks must be connected so that extend is denied with the ignition key on or the park brake released. Only one is required to disable extension.\u003c\/p\u003e\u003ch4\u003eKeeping it working\u003c\/h4\u003e\u003cp\u003eThe leg is a screw jack, so the screw and nut must be kept clean and dry. Wash with a wet rag or mild detergent, never a pressure washer, and do not spray cleaner heavily onto the motor gearbox. Lubricate the pivot points and the screw and nut with a \u003cstrong\u003edry film silicone or PTFE spray only\u003c\/strong\u003e. Oily or greasy lubricants attract dirt and cause screw and nut problems.\u003c\/p\u003e\u003ch4\u003eService parts\u003c\/h4\u003e\u003cp\u003eLeg assembly \u003ca href=\"\/products\/stabi-lite-leg-assembly\"\u003e7588\u003c\/a\u003e, about 16 1\/2 inches of travel. Class C channel mount brackets 7592PS passenger side and 7592DS driver side, fitting any channel frame up to a 3 3\/4 inch flange width. Motor and gearbox assembly \u003ca href=\"\/products\/harness-stabi-lite-motor-w-connector-added\"\u003e6836\u003c\/a\u003e; the motor is not sold separately from the gearbox.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQ011R1-STABI-LITE-Installation-Manual.pdf\" target=\"_blank\"\u003eSTABI-LITE Installation Manual, EQ011R1 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Stabi-Lite-Maint-Troubleshooting-TM.pdf\" target=\"_blank\"\u003eSTABI-LITE and Level-Lite Maintenance and Troubleshooting Guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958748053563,"sku":"8450AM","price":1155.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/8450AM-RVU-scaled.webp?v=1786536981"},{"product_id":"stabi-lite-leg-assembly","title":"Stabi-Lite Leg Assembly","description":"\u003ch3\u003eSTABI-LITE stabilizer leg assembly, EQ Systems part 7588\u003c\/h3\u003e\u003cp\u003eSTABI-LITE is an electric stabilizing system for Class B and Class C motorhomes. It takes the lean out of a coach when a slide room is extended and nearly all of the sway from movement inside. The leg is a motor driven screw jack, not a hydraulic cylinder, and the system is a stabilizer, not a leveller.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eMotor driven screw jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTravel\u003c\/th\u003e\n\u003ctd\u003eApproximately 16 1\/2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted height\u003c\/th\u003e\n\u003ctd\u003eAbout 21 3\/16 inches on the Class C mount bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount bracket\u003c\/th\u003e\n\u003ctd\u003e7592PS passenger side Class C channel mount, 7592DS driver side, opposite hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannel frame capacity\u003c\/th\u003e\n\u003ctd\u003eAny channel frame up to a 3 3\/4 inch flange width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLegs per system\u003c\/th\u003e\n\u003ctd\u003eTwo, one per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eMaintenance, and this affects warranty\u003c\/h4\u003e\u003cp\u003eKeep the leg assemblies clean. Extend the leg to about mid point and clean with a wet rag or a mild detergent such as car wash solution. Do not spray cleaner heavily onto the motor gearbox, and \u003cstrong\u003edo not use a pressure washer\u003c\/strong\u003e. The screw and nut must be kept clean and dry. After cleaning, lubricate the pivot points and the screw and nut with a \u003cstrong\u003edry film silicone or PTFE spray only\u003c\/strong\u003e. Oily or greasy lubricants are not allowed: they attract dirt and cause screw and nut problems.\u003c\/p\u003e\u003ch4\u003eBefore replacing a leg\u003c\/h4\u003e\u003cp\u003eIf a leg will not run, check the power switch, then check for a disable interlock, since extend is blocked with the ignition on or the park brake released. Verify power and ground at the controller, voltage at the control panel, and power and ground reaching the motor connector when the switch is pressed. If voltage is reaching the motor and it will not run, the motor gearbox may be bad or the jack may be jammed: try the cleaning and lubrication first. In extreme cold the legs can simply be frozen in place. The motor and gearbox replacement is part \u003ca href=\"\/products\/harness-stabi-lite-motor-w-connector-added\"\u003e6836\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQ011R1-STABI-LITE-Installation-Manual.pdf\" target=\"_blank\"\u003eSTABI-LITE Installation Manual, EQ011R1 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Stabi-Lite-Maint-Troubleshooting-TM.pdf\" target=\"_blank\"\u003eSTABI-LITE and Level-Lite Maintenance and Troubleshooting Guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958763290683,"sku":"7588","price":331.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/7588-Stabi_385c90be-8755-40bf-9b0a-0557c0ebd480.jpg?v=1786537169"},{"product_id":"harness-stabi-lite-motor-w-connector-added","title":"HARNESS, STABI-LITE MOTOR w\/ CONNECTOR ADDED","description":"\u003ch3\u003eSTABI-LITE motor and gearbox, EQ Systems part 6836\u003c\/h3\u003e\u003cp\u003eSTABI-LITE is an electric stabilizing system for Class B and Class C motorhomes. It takes the lean out of a coach when a slide room is extended and nearly all of the sway from movement inside. The leg is a motor driven screw jack, not a hydraulic cylinder, and the system is a stabilizer, not a leveller.\u003c\/p\u003e\u003cp\u003eEQ part 6836 is the replacement listed for the STABI-LITE motor gearbox, the drive on the stabilizer leg that turns the screw. It replaces motor gearbox model 853208J.\u003c\/p\u003e\u003ch4\u003eThe motor is not sold on its own\u003c\/h4\u003e\u003cp\u003eA replacement motor by itself is not available for this unit. It has to be bought as a motor and gearbox assembly, which is what this part is.\u003c\/p\u003e\u003ch4\u003eWiring\u003c\/h4\u003e\u003cp\u003eThe system controller drives each leg motor through a color coded harness: gray and pink for leg 1, purple and brown for leg 2. Either harness can go to either leg, but note which color runs where, because the dials on the controller set the lifting force per leg and that is how a coach with a slide room out is brought to a more level state. Secure harnesses with cable ties or clamps to prevent damage.\u003c\/p\u003e\u003ch4\u003eBefore replacing a motor gearbox\u003c\/h4\u003e\u003cp\u003eConfirm power and ground reach the motor connector when the switch is pressed. If voltage is present and the motor will not run, the gearbox may be bad or the jack assembly may be jammed. Try the cleaning and lubrication process first, using a dry film silicone or PTFE spray on the screw and nut, never an oily or greasy lubricant. If a leg is jammed you may gently try the override hex, but do not overstress it or the override will break. In extreme cold the legs may simply be frozen and need thawing.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Motor-Replacement-Chart-2021-TM.pdf\" target=\"_blank\"\u003eMotor Replacement Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Stabi-Lite-Maint-Troubleshooting-TM.pdf\" target=\"_blank\"\u003eSTABI-LITE and Level-Lite Maintenance and Troubleshooting Guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQ011R1-STABI-LITE-Installation-Manual.pdf\" target=\"_blank\"\u003eSTABI-LITE Installation Manual, EQ011R1 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958763356219,"sku":"6836","price":243.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/6836-Motor.jpg?v=1786537170"}],"url":"https:\/\/eqsystems.us\/collections\/stabi-lite.oembed","provider":"EQ Systems","version":"1.0","type":"link"}