{"title":"Jack Legs","description":"\u003cp\u003eExplore our range of hydraulic jack legs, designed to meet your lifting and leveling needs. With various lifting capacities and stroke lengths, our rugged jacks can be integrated into your existing hydraulic system or purchased as part of a complete lifting\/leveling solution. Our straight leg jacks are powder-coated for durability, lightweight, and perfect for limited ground clearance applications. Trust EQ Systems for reliable and high-quality hydraulic jack options.\u003c\/p\u003e\n","products":[{"product_id":"tj-replacement-cylinder","title":"TJ replacement cylinder","description":"\u003ch3\u003eTJ replacement cylinder, EQ Systems part 1218EQ\u003c\/h3\u003e\u003cp\u003eReplacement hydraulic cylinder for the EQ Systems TJ tongue pull jack. The TJ is the bumper pull jack in the EQ Systems trailer range: 6,000 lbs lifting capacity, 16 inch stroke, designed for bumper pull applications and supplied with manual override as standard.\u003c\/p\u003e\u003ch4\u003eWhat is replaced\u003c\/h4\u003e\u003cp\u003eThe cylinder is the working part inside the jack. The outer tube, mounting and foot stay on the trailer. A cylinder is the right part when the jack leaks, will not hold a load, or will not build pressure while the pump and valves test good.\u003c\/p\u003e\u003ch4\u003eCheck the fittings\u003c\/h4\u003e\u003cp\u003eOlder EQ Systems cylinders were built with NPTF fittings and current production uses SAE. On an SAE fitting there are no threads exposed between the cylinder body and the hex; on NPTF the threads are exposed. If your jack has NPTF fittings, call EQ Systems at 800-846-9659 before ordering so the correct fittings go out with the cylinder.\u003c\/p\u003e\u003ch4\u003eRelated\u003c\/h4\u003e\u003cp\u003eTJ single leg systems are run by the \u003ca href=\"\/products\/replacement-hydraulic-pump-3200ks\"\u003e3200KS\u003c\/a\u003e pump with reservoir 3333K, and take cover 70337. Switchgear for a single hydraulic jack is \u003ca href=\"\/products\/single-switch-square-plug6526\"\u003e6526\u003c\/a\u003e with a square black 4 pin pump connector, or \u003ca href=\"\/products\/single-switch-white-plug-7814\"\u003e7814\u003c\/a\u003e with a round white 4 pin.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS03R11-EQ-Systems-Trailer.pdf\" target=\"_blank\"\u003eEQ Systems Lifting Systems for Any Size Trailer (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Hydraulic_Cylinder_Identification_for_Tube-in-Tube_Jacks.pdf\" target=\"_blank\"\u003eHydraulic Cylinder Identification for Tube in Tube Jacks (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958750969915,"sku":"1218EQ","price":569.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/1218-1.jpg?v=1786537020"},{"product_id":"dp-18-jack-leg-with-leg-switch-7234","title":"SL 18 Jack Leg with leg switch #7234","description":"\u003ch3\u003eSL 18 straight leg hydraulic jack with leg switch, EQ Systems part 7234\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied with the plunger style leg switch fitted, so the control panel receives a jack down signal from this leg. If your system does not use leg switches, order the version without one.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e17.5k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e40.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003eleg with switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e22 1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFoot width\u003c\/th\u003e\n\u003ctd\u003e11.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part \u003ca href=\"\/products\/12x12-ft-pad-for-legswitch7820\"\u003e7820\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 1601EQ\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 1383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 18 builds: part \u003ca href=\"\/products\/dp-18-jack-w-o-leg-switch-7134\"\u003e7134\u003c\/a\u003e, 22 3\/4\" body at 1\", 2\" rod.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958753132603,"sku":"7234","price":979.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/7234-3.jpg?v=1786537057"},{"product_id":"dp-18-jack-w-o-leg-switch-7134","title":"SL 18 Jack w\/o leg switch #7134","description":"\u003ch3\u003eSL 18 straight leg hydraulic jack without leg switch, EQ Systems part 7134\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a leg switch, for systems that report jack position another way or not at all. If your control panel shows a jack down light for each leg, you need the version with the switch.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e17.5k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e40.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003e3 3\/8 inch body plate mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e22 3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePlate position\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRod diameter\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part \u003ca href=\"\/products\/12x12-foot-pad-with-bolt-7821\"\u003e7821\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 1601EQ\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 1383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 18 builds: part \u003ca href=\"\/products\/dp-18-jack-leg-with-leg-switch-7234\"\u003e7234\u003c\/a\u003e, 22 1\/8\" body.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958753263675,"sku":"7134","price":933.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/7134-2.jpg?v=1786537058"},{"product_id":"sl16-jack-leg-w-leg-switch7114","title":"SL16 Jack leg w\/Leg Switch#7114","description":"\u003ch3\u003eSL 16 straight leg hydraulic jack with leg switch, EQ Systems part 7114\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied with the plunger style leg switch fitted, so the control panel receives a jack down signal from this leg. If your system does not use leg switches, order the version without one.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e12k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e21.4375\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e37.0625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e30 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003eleg with switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e21 1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFoot width\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part \u003ca href=\"\/products\/10x10-foot-pad-leg-switch-7819\"\u003e7819\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 1592EQ\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 1383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 16 builds: part \u003ca href=\"\/products\/sl-16-jack-w-o-leg-switch-7214\"\u003e7214\u003c\/a\u003e, 21 1\/8\" body.\u003c\/p\u003e\u003cp\u003eBody length was 20 1\/8 inches before 2023.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958753361979,"sku":"7114","price":828.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/SL-16-jackleg-with-leg-switch-7114_2b9f23ae-5d46-4c31-bd8d-326d9bc8c982.jpg?v=1786537059"},{"product_id":"sl-16-jack-w-o-leg-switch-7214","title":"SL 16 Jack without leg switch","description":"\u003ch3\u003eSL 16 straight leg hydraulic jack without leg switch, EQ Systems part 7214\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a leg switch, for systems that report jack position another way or not at all. If your control panel shows a jack down light for each leg, you need the version with the switch.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e12k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e21.4375\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e37.0625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e30 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003e2 7\/8 inch body plate mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e21 1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part \u003ca href=\"\/products\/10x10-foot-pad-and-bolt-7849\"\u003e7849\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 1592EQ\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 1383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 16 builds: part \u003ca href=\"\/products\/sl16-jack-leg-w-leg-switch7114\"\u003e7114\u003c\/a\u003e, 21 1\/8\" body.\u003c\/p\u003e\u003cp\u003eBody length was 20 1\/8 inches before 2023.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958753427515,"sku":"7214","price":764.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/7214-USE-1.jpg?v=1786537061"},{"product_id":"sl-15-jack-without-leg-switch","title":"SL 15 Jack without leg switch","description":"\u003ch3\u003eSL 15 straight leg hydraulic jack without leg switch, EQ Systems part 7636A\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a leg switch, for systems that report jack position another way or not at all. If your control panel shows a jack down light for each leg, you need the version with the switch.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e7.5k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e15\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e19.89\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003e2 3\/8 inch body plate mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e19 1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePlate position\u003c\/th\u003e\n\u003ctd\u003e-5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part 70445\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 2943A\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 3203\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 15 builds: part 7636, 19 3\/8\" body at 0\".\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958760472635,"sku":"7636A","price":663.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/EQS-7636-SL15-4.23_bdff0c60-92e7-44ba-ab0e-35413af85756.jpg?v=1786537131"},{"product_id":"sl-13-lp-jack-without-leg-switch","title":"SL 13 LP Jack without leg switch","description":"\u003ch3\u003eSL 13 straight leg hydraulic jack without leg switch, EQ Systems part 7842A\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a leg switch, for systems that report jack position another way or not at all. If your control panel shows a jack down light for each leg, you need the version with the switch.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e7.5k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e13\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e16.98\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e20 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003e2 3\/8 inch body plate mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e16 3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePlate position\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part \u003ca href=\"\/products\/70385-7-x-7-foot-pad-with-lock-nut\"\u003e70385\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 3142A\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 3203\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 13 builds: part 70381, 16 3\/8\" body at 7 1\/4\"; part \u003ca href=\"\/products\/sl-13-hp-jack-without-leg-switch\"\u003e7842\u003c\/a\u003e, 17 3\/8\" body at 0\"; part \u003ca href=\"\/products\/sl-13-hp-jack-without-leg-switch\"\u003e7842\u003c\/a\u003e, 16 3\/8\" body at -7\/8\"; part 7842REV, 16 3\/8\" body at 2\".\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958760570939,"sku":"7842A","price":433.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/EQS-7842-4.23.jpg?v=1786537132"},{"product_id":"sl-13-hp-jack-without-leg-switch","title":"SL 13 HP Jack without leg switch","description":"\u003ch3\u003eSL 13 straight leg hydraulic jack without leg switch, EQ Systems part 7842\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a leg switch, for systems that report jack position another way or not at all. If your control panel shows a jack down light for each leg, you need the version with the switch.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e7.5k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e13\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e16.98\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e20 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003e2 3\/8 inch body plate mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e17 3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePlate position\u003c\/th\u003e\n\u003ctd\u003e0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part \u003ca href=\"\/products\/70385-7-x-7-foot-pad-with-lock-nut\"\u003e70385\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 1383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003ePart 7842 appears on more than one row of the identification chart: 17 3\/8\" body at a 0\" plate position (Obsolete, contact EQ Systems), and 16 3\/8\" body at a -7\/8\" plate position. Measure yours, and call EQ Systems at 800-846-9659 if it matches the obsolete build.\u003c\/p\u003e\u003cp\u003eOther SL 13 builds: part 70381, 16 3\/8\" body at 7 1\/4\"; part \u003ca href=\"\/products\/sl-13-lp-jack-without-leg-switch\"\u003e7842A\u003c\/a\u003e, 16 3\/8\" body at 2\"; part 7842REV, 16 3\/8\" body at 2\".\u003c\/p\u003e\u003cp\u003eObsolete, contact EQ Systems.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958760636475,"sku":"7842","price":433.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/EQS-7842-A-4.23.jpg?v=1786537134"},{"product_id":"sl-24-a-17k","title":"SL 24 A-17K","description":"\u003ch3\u003eSL 24 straight leg hydraulic jack without leg switch, EQ Systems part 70217\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a leg switch, for systems that report jack position another way or not at all. If your control panel shows a jack down light for each leg, you need the version with the switch.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e17.5k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e29.94\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e53.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e56 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003e3 3\/8 inch body plate mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e29 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePlate position\u003c\/th\u003e\n\u003ctd\u003e14 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRod diameter\u003c\/th\u003e\n\u003ctd\u003e1 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part 70299\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 3144AEQ\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 1383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 24 builds: part 70073, 28 3\/8\" body; part 7923, 29 1\/2\" body at 8 1\/2\", 2\" rod; part \u003ca href=\"\/products\/sl-24-s\"\u003e7848\u003c\/a\u003e, 29 1\/2\" body at 14 1\/2\", 2\" rod.\u003c\/p\u003e\u003cp\u003eBody length was 29 inches before June 2023.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958760996923,"sku":"70217","price":859.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/SL-24-replacement-Jack_667e97ac-aa1f-4698-9ba0-afb1cb139fd1.jpg?v=1786537135"},{"product_id":"sl-24-s","title":"SL 24 S","description":"\u003ch3\u003eSL 24 straight leg hydraulic jack without leg switch, EQ Systems part 7848\u003c\/h3\u003e\u003cp\u003eStraight leg hydraulic jack for EQ Systems lifting and leveling systems. Straight leg jacks are powder coated, light for their capacity, and suit applications with limited ground clearance. This jack can be fitted to an existing EQ Systems hydraulic system or bought as part of a complete lifting and leveling solution.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a leg switch, for systems that report jack position another way or not at all. If your control panel shows a jack down light for each leg, you need the version with the switch.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSL 24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifting capacity, each jack\u003c\/th\u003e\n\u003ctd\u003e17.5k lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder bore\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRetracted length\u003c\/th\u003e\n\u003ctd\u003e29.94\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtended length\u003c\/th\u003e\n\u003ctd\u003e53.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e56 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount style\u003c\/th\u003e\n\u003ctd\u003e3 3\/8 inch body plate mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody length\u003c\/th\u003e\n\u003ctd\u003e29 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePlate position\u003c\/th\u003e\n\u003ctd\u003e14 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRod diameter\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eService parts for this jack\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement foot pad: part \u003ca href=\"\/products\/12x12-foot-pad-with-bolt-7821\"\u003e7821\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement cylinder: part 3144EQ\u003c\/li\u003e\n\u003cli\u003eReplacement nut and bolt: part 1383\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMaking sure this is your jack\u003c\/h4\u003e\u003cp\u003eBody length is the fixed outer body measured with the jack retracted. Plate position is measured from the closed end of the body, positive toward the foot and negative past the closed end. Measure both before ordering, because EQ Systems has built the same model in more than one configuration.\u003c\/p\u003e\u003cp\u003eOther SL 24 builds: part 70073, 28 3\/8\" body; part \u003ca href=\"\/products\/sl-24-a-17k\"\u003e70217\u003c\/a\u003e, 29 1\/2\" body at 14 1\/2\", 1 1\/2\" rod; part 7923, 29 1\/2\" body at 8 1\/2\", 2\" rod.\u003c\/p\u003e\u003cp\u003eBody length was 29 inches before June 2023.\u003c\/p\u003e\u003ch4\u003eDocuments\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Jack-Replacement-Chart-Cylinder-Foot-identification-2025-V2.pdf\" target=\"_blank\"\u003eJack Replacement Cylinder and Foot Identification Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/EQS26R14-EQ-Systems-Class-A-and-C.pdf\" target=\"_blank\"\u003eEQ Systems Class A and Class C system guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/cdn\/shop\/files\/Required-Maintenance-Items-Hydraulic-Systems-EQ-TM.pdf\" target=\"_blank\"\u003eRequired Maintenance Items for EQ Systems Hydraulic Jacks and Slide Systems (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":43958761095227,"sku":"7848","price":713.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2608\/6971\/files\/SL-24-replacement-Jack.jpg?v=1786537137"}],"url":"https:\/\/eqsystems.us\/collections\/jack-legs.oembed","provider":"EQ Systems","version":"1.0","type":"link"}